UPVC Door Handles Replacement Guide
Replacing door handles made of upvc is a simple DIY project once you have the proper measurements. These measurements include the distance from the backplate of the handle's mounting centres (sometimes called PZ) to the central point of keyhole.
The most commonly used uPVC handle has two inline levers. One is internal and the other exterior, linked by spindles. They operate the multipoint lock found on uPVC and aluminium doors, as well as some wooden ones.
Brands & Finishes
A damaged uPVC handle can be much more than a minor inconvenience. It can also make your home vulnerable to burglars who may make the lock open and gain entry to your home. It's important to take action when you notice your uPVC handles are failing.
Fortunately, changing your uPVC handles on your front door is a simple job that requires only the use of a few tools and careful measurements. In most cases, you can just screw in your new uPVC handle and you're good to go. However, it's a good idea to look for the highest quality locks and handles that meet the highest security standards.
You can choose from a variety of uPVC handles. These include lever/lever, pad, offset and snib handles. Lever/lever handles, made up of two handles inline that can be moved are very popular among homeowners. Pad uPVC handles are smaller in size and often have an offset design that allows you to keep the exterior of your home secure after the entry.
A uPVC offset handle consists of two pads, one fixed and the other movable. This type of handle is found on sliding patio doors. Snib handles are similar to offset handles but they can be utilized on uPVC french doors.
When choosing your replacement uPVC door handle, you must think about the style of your existing windows and doors. The handle should be in line with the color and finish of your existing doors. Some handles are available in different finishes, such as black and white. Others come with more fashionable choices, such as chrome or gold.
It is important to get your screw-to-screw and PZ measurements right when taking your measurements. The PZ measurement is the distance from the center of the hole in the spindle to the centre of the keyhole. The screw-to-screw measurement is the distance between the screw hole on your existing handle and the closest screw on your door frame, and it's important to measure it accurately to determine an appropriate replacement.
Measurement & Fitting
The uPVC handle comes with two levers, one on each side of the lock mechanism that make it easy to operate both from inside and out. Providing a comfortable grip and strain-free functionality handles are an essential part of a door's security mechanism. With the right set of uPVC handles you can ensure your door is safe from intruders and keep it looking great while doing it.
The right uPVC handle can be challenging and confusing because there are a variety of sizes, shapes and designs available. There are three key measurements to take into consideration when choosing a replacement option for your uPVC doors. The backplate's fixing centre keyhole and lever dimension, and the spindle's diameter are important measurements. Incorporating these factors will ensure that your new handle is compatible with your uPVC door and is an perfect fit.
Measuring these points is relatively easy, but you need to be as accurate as possible. You might end having a handle that isn't properly fitted and could cause issues when opening your uPVC doors. The most important measurement is the top screw on the backplate fixing centre, commonly called the PZ size. This measures from the pivot point of the keyhole or handle lever to the center of the screw. It is typically 92mm, but it can vary.
You should also check that your uPVC handles are equipped with the correct number of keyspindles to operate your multi-point locking system. It is ideal that they be the same as the number of keys you use to lock and unlock your uPVC doors. Some older doors have a single spindle that locks the lock. Modern doors have two spindles, which allow independent operation both indoors and outdoors.
The most undesirable thing to have is a drooping or sagging uPVC door handle because it can put a great amount of stress on the locking mechanism within and potentially result in broken components. Look for uPVC handles with spring cassettes built in to avoid this. They're not just attractive, but they reduce the operating pressure from the door locking mechanism, and will give it a much longer time to last.
upvc door handles with the tubular latch can cause a stiff door handle. It is usually a straightforward solution that can be solved by repositioning your replacement handle's internal fixing plates. Open the door and check there are no obvious obstructions such as loose screws, or signs that internal components are protruding through the latch plate. If this isn't the case, it could be one of the spring cassettes inside your uPVC handle that may need to be relocated.
The easiest way to do this is to buy the door handle repair kit. The kit includes all the tools needed to remove the handles, and then to reposition the cassettes. Simply follow the instructions to do this and you'll soon have a sagging or sliding uPVC door handle that's again fully operable.
A floppy uPVC handle can be caused by thermal contraction however, it is more likely to signify that the gearbox has broken. This isn't an issue that you can fix yourself. You will require the assistance of locksmith.
It is important to use an authentic replacement gearbox for your uPVC doors. This will ensure everything is properly installed. Using an aftermarket part that is less expensive can result in problems, such as an insecure lock or lower security for your home.
You could also replace the entire uPVC lock and handle mechanism. This will not only fix the issue of sagging, but also ensure that your handle is completely functional and secure. It's important to keep in mind that this isn't a simple or cheap solution. It will involve the removal of your existing uPVC handle and replacement with a brand new handle. It's also worth mentioning that this is only suitable for those with a sprung handled double glazing door since the door will need to be repaired. For a quicker and cheaper option you can always purchase handles that come with built-in springs, which will eliminate drilling holes in the doors.
Can I Fit a uPVC Door Handle on an Aluminium or Timber Door?
There are a variety of things to take into consideration when choosing the right doors for your house. Doors made of aluminum are modern and appealing and uPVC provides durability, energy efficiency and security. The correct handle is essential for the style of door you wish to install. It is important to choose the appropriate handles for your property regardless of whether you're replacing your existing ones or adding new ones. Our uPVC door handle replacement guide will help you make the best decision and install them with confidence.
Changing a uPVC door handle is simple and requires only a few tools. First, you will need to take off the old handle. This can be accomplished by unscrewing the screws that keep it in place with the screwdriver. Once the screws are removed, you can take the handle out of the door.
The next step is to measure the size of your door handle. You'll need to find the center of the fixing holes on the backplate. This is known as the PZ measurement, and determines the spindle size of the handle. Once you have this information, you can buy an alternative handle that is of the correct size for the door you have.
There are many different types of uPVC door handle available to satisfy your individual needs. Some of these handles are designed with extra security features, such as anti-drilling protection and cylinder guards as well as mole grips. These uPVC handle designs can be fitted to uPVC, aluminium and wooden doors, and are perfect for those who are looking to increase security for their home.
If you are seeking a more traditional uPVC handle there are many options that will suit your needs. They come in various finishes like black, chrome and gold. They are generally a little bit more expensive than standard ones, but they will provide a beautiful finish to your door.
It is important to check the dimensions of the uPVC handle before ordering. You will need to check the dimensions mentioned above, as well as the keyhole and lever dimensions and the backplate mounting centre, to ensure that your new handle is the perfect fit for your door.